|Year of Production||2017 - 2022|
|Condition||Slightly Wear, Like New|
|Scope of Delivery||
Original Watch, Original Box, Original Warranty Card
|Trade-In / Swap||
USDT, Cash, Bank Transfer, Credit Card, Amex, Tele Transfer
|Schedule an Appointment||
Call/Text +60.1122.00.3344 / +65.9779.1001
|Showroom Location||The Super Rich Concierge Malaysia, Kuala Lumpur|
RM 11-03 AUTOMATIC
AUTOMATIC WINDING FLYBACK CHRONOGRAPH
AN EMBLEMATIC MODEL
Since the brand’s debut, Richard Mille watches have distilled performance in an unparalleled range of areas. To appreciate this, one need look no further than the RM 011. In terms of design, of materials used, of its details, its movement and its extraordinary adaptability, this piece embodies everything the brand stands for.
The guiding principle for Richard Mille behind the RM 11-03 was to imbue the new automatic RMAC3 calibre with a 3D quality and to bring its complexity visually to the fore.
Skeletonised, automatic winding movement with a variable-geometry rotor, offering hours, minutes, seconds, flyback chronograph, 60-minute countdown timer at 9 o’clock, 12-hour totaliser, oversize date and month indicator.
BASEPLATE AND BRIDGES MADE OF GRADE 5 TITANIUM
The baseplate and bridges were subjected to separate and extensive validation tests to ensure optimal strength requirements.
OVERSIZE DATE DISPLAY
RM 11-03 McLaren, RICHARD MILLE'S TAKE ON THE GRAND TURISMO
• 18K white gold weight segment
• Weight segment with 6 possible positions adjusted by screws in grade 5 titanium
• 18K white gold wings
• Ceramic ball bearings
• Unidirectional anti-clockwise winding
This exclusive Richard Mille design makes it possible to effectively adapt rewinding of the mainspring to the user’s activity level, in sporting or non-sporting environments. By adjusting the six-position rib, the rotor’s inertia is modified to either speed up the winding process in the case of leisurely arm movements, or to slow it down during sporting activities.
Thickness: 9.00 mm
Number of jewels: 68
Barrel arbour: AP 20 steel
Balance: Glucydur®, 4 arms, moment of inertia 4.8 mg•cm2, angle of lift 53°
Frequency: 28,800 vph (4 Hz)
Balance spring: AK3
Shock protection: INCABLOC 908.22.211.100 (transparent)
Escapement wheel jewels: Rubifix (transparent)
Three-position stem: manual winding, date, hand setting
Skilled workmanship and protracted machining times scarcely to be believed are required to achieve the level of ergonomics and finishing —unique in the world of haute horlogerie— Chamfering, brushing and polishing the surfaces, which is completed entirely by hand, is a delicate and time-consuming task. This silhouette, which first appeared with the RM 27-01 Rafael Nadal, has become a distinguishing characteristic of all Richard Mille’s sports watches, differentiating them from lifestyle models while reinforcing their structural integrity.
The tripartite case of the RM 11-03 is water resistant to 50 metres, ensured by two Nitrile O-ring seals. The case is assembled using 20 spline screws in grade 5 titanium and abrasion-resistant washers made of 316L stainless steel.
• Hand-polished locking sections
• Burnished pivots
• Diamond-polished sinks
• Pinions with undercuts
• Chamfered and polished by hand
• Screw slot and screws bevelled and polished for a rounded, polished tip
• Diamond-polished angles
• Circular-finished faces
• Rhodium plating (before cutting the teeth)
• Minimal corrections applied to the wheels in order to preserve geometry and performance
FREE-SPRUNG BALANCE WITH VARIABLE INERTIA
SPLINE SCREWS IN GRADE 5 TITANIUM FOR THE BRIDGES AND CASE
This permits better control of the torque applied to the screws during assembly. These screws are unaffected by physical manipulation during assembly or disassembly and age well.